All components of the device that are in direct contact with the sterilized load have no toxic, sensitizing or irritating effects.īy pressing the “TEST” field, you can go to the test program menu.įrom here you can select the vacuum leak test program and the Helix/B&D test program. Performing the sterilization process in the ENBIO S device does not affect material biocompatibility. Maintain particular care and use protective gloves to remove the load, or wait until it cools. If the process was completed successfully, the display will alternately show information that the process has been completed and the load is sterile, and that the chamber may be opened.Īfter the process in 134☌ FAST program tools are wet and hot.īy pressing the “FINISH” field, you return to the start screen.ĪTTENTION! When the process is completed, the chamber, the tray and the load are hot. When a program is being run, the screen displays the temperature of the selected sterilization program 125☌ or 134☌, the current temperature of the process chamber in the bottom left corner 116.7☌, the pressure currently in the chamber in the bottom right corner “0.30 Bar” while the process duration left is displayed in the upper right corner of the screen “12 Min Left.” This is the expected time, which may be extended due to the mass and type of charge.ĭuring the process, the “STOP” field is displayed instead of the START field, enabling you to stop the process at any time.The upper left corner of the screen displays the status of individual subsequent program stages, e.g. ![]() field has been selected, the screen will display a chart of pressure during the entire pro- cess, with the current stage of the program indicated, while information on subsequent stages is displayed in the upper left corner of the screen. If you decide to continue working or the. You can continue working without saving the data on the USB drive by pressing the YES field or stop working by selecting the NO, field to insert the drive in the port and start the program from the beginning. If the USB drive has not been inserted in the device, the USB symbol is not displayed in the bottom right corner of the screen, and a message about the missing USB drive is displayed. Now you can select the program by pressing the symbol of the temperature you want to perform the sterilization in 121☌ or the selected program is initiated by pressing the corresponding symbol “START.” When the chamber is locked by turning the lock knob clockwise, the display will show the START symbol, indicating the chamber has been closed correctly. When the chamber is opened, the DOOR OPEN symbol blinks. In the Program menu, you can choose the 121☌, 134☌ temperature programs and 134☌ FAST. Do not exceed a maximum weight of 500g (1.10 lb) for ENBIO S.įrom here you can execute the Program, go to the Test, Information menu, and the COUNTERS menu. The 121☌ should be used to sterilize all other materials that cannot be subjected to sterilization at the temperature of 134☌. ![]() The 134☌ program is recommended for the majority of sterilized materials due to the short duration of the entire program. *The duration of the first process may be longer due to the need for the device to heat up. *Ambient temperature can affect the process extension. ![]() Place tools or materials in the working chamber tray and close the chamber and turn the knob locking the front of the device clockwise.ĭepending on the type of load to be sterilized, the user is responsible for selecting the appropriate program dedicated for the given type of load, in accordance with the manufacturer’s recommendations for sterilization. Monitor the water level in the tank regularly, depending on how frequently you perform your processes. Make sure that water supply and wastewater tubes are connected correctly, and that water is present in the water supply container, while the wastewater tank is empty, in order to prevent overflow. This process can remove 99% of the air inside of the chamber before the temperature and pressure increases to it’s necessary parameters.īefore initiating the sterilization cycle, turn the device on using the main switch located on the rear panel of the device. What is a Class B Autoclave?Ī Class B Sterilizer is a high level steam sterilizer that uses a vacuum pump to remove air/steam mixtures from the chamber prior to sterilization cycle beginning. And if you just want to talk to someone for any questions you may have, call our Free Tech Support at 70 Option 3. Just set up, press start and get sterilizing. No logging in or account management required. This easy-to-use device is meant for cost-efficient ease of access. ![]() It can hold up to 8 pouches at a time and can sterilize tools in just 7 minutes with unpouched materials. This autoclave is a Class B Pre/Post Vacuum Cycle style of autoclave. The Enbio S is the newest in Enbio’s line of high-quality, low price autoclaves.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |